How to Create a Bootable USB from ISO on Linux

This guide shows how, with minimal effort, to create a bootable USB from ISO in Linux using the built-in dd comm

Creating a bootable USB from an ISO image on Linux is a great way to install a new operating system or try a new distribution. With the help of a bootable USB, you can easily boot your computer from the USB drive and install the operating system directly to your hard drive.

There are several methods to create a bootable USB from an ISO in Linux, as users often prefer to use GUI apps such as Etcher or Ventoy for this purpose. But there is an easy command line way, too.

Using the built-in dd tool in Linux, you can make bootable ISO for any operating system. The good news is that most Linux distributions have preinstalled it by default.

This guide will walk you through creating a bootable USB drive from an ISO image on Linux using the dd command to have your bootable USB drive ready for action in just minutes without wasting time installing additional applications.

What is dd Command in Linux?

The dd (data duplicator) utility is a powerful command-line tool that makes copies using block by block from one device to another. So we can use it for data backup and restoration from one device to another.

However, you may have heard the app’s nickname, “data destroyer,” because this command is capable of causing significant damage. For example, if you specify by mistake the wrong destination, as the root partition of your disk rather than your USB device, you will end up with a destroyed operating system.

So, remember to double-check your syntax before executing any dd command to avoid irreparable errors and losing your data.

How to Create Bootable USB from ISO File on Linux

This assumes you already have an ISO file that you want to move to an external thumb drive; type USB storage volume.

1. Find the USB Device Name

First, connect the USB device and find the name under which it is presented on your computer. You can do this easily using the lsblk command.

lsblk
Find the USB device name.
Find the USB device name.

As you can see, it is mounted as “sdb” in our case and can thus be accessed with its full path as “/dev/sdb.” However, if you have multiple USB sticks already connected to your system, the drive you’d like to target might be “/dev/sdc,” “/dev/sdd,” etc.

2. Unmount and Format the USB Device

After confirming your target drive, you need to unmount it before formatting it.

sudo umount /dev/sdb*

Next, we need to format the unmounted drive. Let’s do this with the following command:

sudo mkfs.vfat -I /dev/sdb

3. Create a Bootable USB Using the dd Command

We’re ready to copy the ISO file to the USB drive using the dd command. I’d recommend navigating to the directory where you downloaded the ISO. Let’s say you put it in your user’s “Downloads” directory.

cd ~/Downloads

Since we’re already in the right directory, we can use the following command to write ISO to USB and create a bootable USB stick:

sudo dd bs=4M if=filename.iso of=/dev/sdb status=progressCode language: JavaScript (javascript)

Where “filename.iso” is, of course, replaced by the actual name of your ISO file.

  • bs: Sets the default block size.
  • if: Stands for “input file.” It is used to specify the location of the ISO file.
  • of: Stands for “output file.” It sets where to write the ISO file. In our case, it is “/dev/sdb.”

The dd command will copy the ISO file’s contents to your USB stick. This may take several minutes to execute. You should see something like these results returned:

Create a bootable USB from an ISO file.
Create a bootable USB from an ISO file.

That’s all. You can use the USB drive as Linux installation media or a software installer when the process is finished. You can also use the same method to turn an installation ISO image file into a bootable USB stick.

Conclusion

Creating a bootable Linux USB drive from an ISO file is relatively straightforward. The general steps involve selecting the ISO image and target USB drive, then executing the writing process to transfer the image to the USB.

For more about the dd command in Linux, consult its manual page.

Thanks for using this tutorial. Your feedback and comments are most welcome.

Bobby Borisov

Bobby Borisov

Bobby, an editor-in-chief at Linuxiac, is a Linux professional with over 20 years of experience. With a strong focus on Linux and open-source software, he has worked as a Senior Linux System Administrator, Software Developer, and DevOps Engineer for small and large multinational companies.

Think You're an Ubuntu Expert? Let's Find Out!

Put your knowledge to the test in our lightning-fast Ubuntu quiz!
Ten questions to challenge yourself to see if you're a Linux legend or just a penguin in the making.

1 / 10

Ubuntu is an ancient African word that means:

2 / 10

Who is the Ubuntu's founder?

3 / 10

What year was the first official Ubuntu release?

4 / 10

What does the Ubuntu logo symbolize?

5 / 10

What package format does Ubuntu use for installing software?

6 / 10

When are Ubuntu's LTS versions released?

7 / 10

What is Unity?

8 / 10

What are Ubuntu versions named after?

9 / 10

What's Ubuntu Core?

10 / 10

Which Ubuntu version is Snap introduced?

The average score is 68%